Engineering (Electronic and Software), BEng

by mark allen | Nov 16, 2019 | Undergraduate

Course Overview

Overview

Software Engineering at Northampton encompasses both the theory as well as the practice of computing, with special emphasis given to Distributed Information Systems and Knowledge Technologies.

Electronic Engineering is at the core of the modern world, from computers, to digital circuits, photonics and a wealth of electronic devices. This exciting new programme delivers the ideal marriage between Electronic engineering and Software engineering, allowing graduates to pursue a wide range of engineering interests and career choices. You will use your imagination, creativity and knowledge to provide society with the complex electronic systems it needs as well as the software required to operate these systems optimally. In your future career you may design the machines that supply our energy needs, digital control systems for aircrafts, internet-enabled sensors, design complete computer systems on a silicon chip, photonics to instrument the ocean depths, create stunning electronic displays, or design the latest communications satellite or mobile phone.

Students will learn how to design, analyse and implement large-scale software solutions, factoring in hardware and electronics specifics. The courses will cover core computing topics such as computer architecture, programming, programming languages, algorithms, databases, software project management, and software engineering tools and techniques. Advanced computing topics include distributed (autonomous) systems, knowledge technologies, Internet-of-Things, sensor networks, robotics, and security.

AT A GLANCE

LEARNING MODE	On Campus Learning
DEGREE QUALIFICATION	BEng
DURATION	48 months
STUDY MODE	Full Time

What You'll Study

The first two years cover general Engineering, with elements of Chemical, Mechanical, Petroleum and Electrical/Electronics, as well as Civil. In the later years you specialise, following your chosen discipline in greater depth. You do not need to finalise your choice of specialisation until you begin third year.

It is possible to move between MEng and BEng and this can be accomplished at any point until the second half session of fourth year. Successful BEng candidates will be offered the chance to change to the MEng and there is no quota, meaning that if grade requirements are met that transfer is guaranteed.

Compulsory Courses

Principles of Electronics (NT1008) – 15 Credit Points
CAD and Communication in Engineering Practice (NT1010) – 15 Credit Points
Fundamentals of Engineering Materials (NT1012) – 15 Credit Points
Computer Architecture (NT1520) – 15 Credit Points
Electronics Design (NT1501) – 15 Credit Points
Engineering Mathematics 1 (NT1504) – 15 Credit Points
Fundamental Engineering Mechanics (NT1510) – 15 Credit Points
Professional Skills Part 1 (NT1001)

Compulsory Courses

Mathematics for Computing Science (NT2013) – 15 Credit Points
Engineering Mathematics 2 (NT2012) – 15 Credit Points
Modern Programming Languages (NT2510) – 15 Credit Points
Algorithmic Problem Solving (NT2521) – 15 Credit Points
Electronic Systems (NT2504) – 15 Credit Points
Design and Computing in Engineering Practice (NT2501) – 15 Credit Points

In year 3, you have the opportunity to study from a range of courses leading to specialisation in your chosen discipline. This is also the point at which a final decision between MEng and BEng must be made.

Compulsory Courses

Engineering Analysis and Methods 1 (NT3007) – 15 Credit Points
Fluid Mechanics (NT3019) – 15 Credit Points
Chemical Thermodynamics (NT3029) – 15 Credit Points
Heat, Mass & Momentum Transfer (NT3030) – 15 Credit Points
Chemical Reaction Engineering (NT3501) – 15 Credit Points
Separation Processes 1 (NT3502) – 15 Credit Points
Chemical Engineering Design (NT3503) – 10 Credit Points
Process Modelling (NT3504) – 10 Credit Points
Project and Safety Management (NT3599) – 10 Credit Points

Compulsory Courses

BEng Individual Project (NT4014) – 30 Credit Points
Computational Intelligence (NT4095)
Operating Systems (NT4096)
Security (NT4097)
Sensing and Instrumentation (NT4017) – 10 Credit Points
Distributed Systems and Security (NT4595)
Communications Engineering 2 (NT4546) – 15 Credit Points
Group Design Project (BEng) (NT4578) – 15 Credit Points

Assessment Methods

Students are assessed by any combination of three assessment methods:

coursework such as essays and reports completed throughout the course;
practical assessments of the skills and competencies learnt on the course; and
written examinations at the end of each course.

The exact mix of these methods differs between subject areas, year of study and individual courses.

Honours projects are typically assessed on the basis of a written dissertation.

Why Study Chemical Engineering?

In designing, optimising and operating the processes which make the products we use in our lives on a daily basis, chemical engineers play a critical role in making key decisions including: selecting the best reaction pathway to the desired product in order to minimize formation of unwanted by-products; determining how to purify the product; designing the best control system to ensure the process is safe; developing the most cost-effective process; how to deal with unreacted raw materials; optimising the process to maximise yield and recycle energy to maximise efficiency.
The first two years of our engineering programmes cover general engineering. This means you develop vital knowledge in all engineering areas – making you far more adaptable in employment.
The School has produced thousands of world-class graduates over the decades, many who have progressed into Managing Director and Chief Executive roles in the oil and gas and wider energy industries.
Across a number of our programmes, we work closely with colleagues across geology, chemistry and business disciplines to ensure the teaching is fit-for purpose.
We are well connected with local, national and international industry, particularly in the oil/gas/energy industry where you get the chance to experience real-life industry challenges and projects, through guest lectures, company visits and networking events.
All of our degrees have been accredited by the relevant professional engineering institutions, providing you with your first step into becoming a chartered engineer. Undergraduate engineers intending to follow a professional engineering career should consider student membership of the appropriate Engineering Institution.
Our award winning Society of Petroleum Engineers Student Chapter is one of the 230 student chapters around the world.
TAU Racing was established in 2007 by a group of undergraduate engineers of various disciplines. The team’s goal each year is to design and build a single seat racing car to compete at Silverstone in the Formula Student competition.
Hands-on experience of laboratory experiments and of industry-standard software is used to enhance your learning. Group design exercises based on real case field data and supervised by practising professionals from industry prepares you for work.
Opportunities exist for industry sponsored scholarships and bursaries, final year individual projects undertaken with industry, and study abroad opportunities.

Careers

If you have an aptitude and fascination for how the physical world works, are interested in how chemical reactions and the physical properties of matter can be harnessed to create world changing technologies, and want to contribute positively to making the life of the human race better and to the development of a sustainable environment, then you should consider chemical engineering as a career choice.

Excellent job prospects
Competitive starting salaries in the region of £29,500/year
High earning potential throughout your career – salaries for Chartered Chemical Engineers rival those of doctors, lawyers and accountants
Opportunities to travel
Plenty of variety and exciting challenges
The potential to help create a sustainable planet

Chemical Engineers are employed across a broad spectrum of industries including: Energy; Water; Pharmaceuticals; Food & Drink; Oil & Gas; Fast Moving Consumer Goods; Agrochemicals, fine chemicals & petrochemicals; Mining & Minerals; Biotechnology; Management; Consultancy; Environmental Protection; Safety.

CAREER OPPORTUNITIES

Graduate Operations Support Engineer
Graduate Process Engineer
Horizons Facilities Engineer
Technical Safety Engineer

Entry requirements

SQA Highers

Standard: ABBB (Mathematics and Physics or Engineering Science required*)
Applicants who achieve the Standard entry requirements over S4 and S5 will be made either an unconditional or conditional offer of admission.

Minimum: BBB (Good performance required in Mathematics and Physics*)
Applicants who achieve our Minimum entry requirements over S4 and S5 are encouraged to apply and will be considered. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.

Adjusted: BB (Good performance required in Mathematics*)
Applicants who meet one or more of our Widening Participation criteria and who achieve good performance in Maths and one other subject may be made an adjusted offer of entry. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.

* These subjects can be either held at the time of application or be achieved during the appropriate admissions cycle.

A LEVELS

Standard: BBB (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Standard entry requirements are encouraged to apply and may be made an offer of admission.

Minimum: BBC (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Minimum entry requirements are encouraged to apply and will be considered.

Adjusted: BB (Good performance required in Mathematics)
Applicants who meet one or more Widening Participation criteria and who are predicted to achieve a good performance in Mathematics and one other subject may be made an Adjusted offer of entry.

FOR CHEMICAL AND PETROLEUM ENGINEERING PROGRAMMES

Please note: for entry to Chemical and Petroleum Engineering an SQA Higher or GCE A Level or equivalent qualification in Chemistry is required for entry to year 1, in addition to the general Engineering requirements.

English Language Requirements

To study for an Undergraduate degree at the University of Northampton University it is essential that you can speak, understand, read, and write English fluently. The minimum requirements for this degree are as follows:

IELTS Academic:

OVERALL – 6.0 with: Listening – 5.5; Reading – 5.5; Speaking – 5.5; Writing – 6.0

TOEFL iBT:

OVERALL – 78 with: Listening – 17; Reading – 18; Speaking – 20; Writing – 21

PTE Academic:

OVERALL – 54 with: Listening – 51; Reading – 51; Speaking – 51; Writing – 54

Cambridge English Advanced & Proficiency:

OVERALL – 169 with: Listening – 162; Reading – 162; Speaking – 162; Writing – 169

How to apply

This programm by online learning has start dates in September and January of each academic year.

We recommend that you apply as early as possible; this is particularly important for applicants who may need to allow sufficient time to take an English language test

Documentation required

Applications are made online via the University Application Service, EUCLID.

Please follow the instructions carefully and make sure that you have included the following documentation with your application:

Degree certificates showing award of degree.
Previous academic transcripts for all past degree programmes.
A reference in support or your application. The reference should be academic and dated no earlier than one year from the start of study on the LLM programme.
Evidence of English language proficiency, if required.

If you are currently studying for your degree or you are not in a possession of an English test result you may still apply to the programme. Please note that it is your responsibility to submit the necessary documents.

After you apply

After your application has been submitted you will be able to track its progress through the University’s applicant hub.

Application processing times will vary however the admissions team will endeavour to process your application within four to six weeks of submission. Please note that missing documentation will delay the application process.

You will be informed as soon as possible of the decision taken. Three outcomes are possible:

You may be offered a place unconditionally
You may be offered a conditional place, which means that you must fulfil certain conditions that will be specified in the offer letter. Where a conditional offer is made, it is your responsibility to inform the College Postgraduate Office when you have fulfilled the requirements set out.
Your application may be unsuccessful. If your application has not been successful, you can request feedback from us or refer to our guidance for unsuccessful applicants, which explains some of the common reasons we why we reach this decision.
View the University’s guidance for unsuccessful applicants

Terms and conditions of admissions

The University’s terms and conditions form part of your contract with the University, and you should read them, and our data protection policy, carefully before applying.

Northampton University admissions terms and conditions

Engineering (Mechanical and Electrical), BEng

by mark allen | Nov 16, 2019 | Undergraduate

Course Overview

Overview

Joint degree combining Mechanical and Electrical Engineering.

Mechanical engineering is concerned with creative and imaginative use of engineering principles and science to shape the world around us, through the development of new materials, technologies, processes and products. Mechanical engineers design and develop everything that moves or has moving parts, ranging from spacecrafts and aeroplanes to racing cars, from household goods like refrigerators to the small motors that turn a CD in a CD player, from robotic control of machinery to nanotechnologies, from mechanical hearts and artificial limbs to fitness machines, and from oil and gas exploration and production technologies to wind turbines.

Our society relies on Electrical Engineers for everything from low power electrical machines, control systems, to high voltage electrical power generation and distribution systems. Electrical Engineering is at the core of the modern world, from computers, to digital circuits, photonics and a wealth of electronic devices.

AT A GLANCE

LEARNING MODE	On Campus Learning
DEGREE QUALIFICATION	BEng
DURATION	48 months
STUDY MODE	Full Time

What You'll Study

The first two years cover general Engineering, with elements of Chemical, Mechanical, Petroleum and Electrical/Electronics, as well as Civil. In the later years you specialise, following your chosen discipline in greater depth. You do not need to finalise your choice of specialisation until you begin third year.

It is possible to move between MEng and BEng and this can be accomplished at any point until the second half session of fourth year. Successful BEng candidates will be offered the chance to change to the MEng and there is no quota, meaning that if grade requirements are met that transfer is guaranteed.

Compulsory Courses

Principles of Electronics (NT1008) – 15 Credit Points
Fundamentals of Engineering Materials (NT1012) – 15 Credit Points
CAD and Communication in Engineering Practice (NT1010) – 15 Credit Points
Fundamental Engineering Mechanics (NT1510) – 15 Credit Points
Engineering Mathematics 1 (NT1504) – 15 Credit Points
Electronics Design (NT1501) – 15 Credit Points
Professional Skills Part 1 (NT1001)

Optional Courses

Select a further 30 credit points from courses of choice.

Compulsory Courses

Engineering Mathematics 2 (NT2012) – 15 Credit Points
Process Engineering (NT2011) – 15 Credit Points
Fluid Mechanics and Thermodynamics (NT2004) – 15 Credit Points
Design and Computing in Engineering Practice (NT2501) – 15 Credit Points
Solids and Structures (NT2502) – 15 Credit Points
Electrical and Mechanical Systems (NT2503) – 15 Credit Points
Electronic Systems (NT2504) – 15 Credit Points

Optional Courses

Select a further 15 credit points from courses of choice.

Compulsory Courses

Control Systems (NT3043) – 15 Credit Points
Engineering Analysis and Methods 1 (NT3007) – 15 Credit Points
Fluid Mechanics (NT3019) – 15 Credit Points
Engineering Materials (NT3028) – 15 Credit Points
Electrical Power Engineering A (NT3557) – 15 Credit Points
Project and Safety Management (NT3599) – 10 Credit Points
Dynamics 1 (NT3511) – 15 Credit Points
Engineering Thermodynamics (NT3521) – 10 Credit Points
Design of Mechanical Elements (NT3522) – 10 Credit Points

Compulsory Courses

Sensing and Instrumentation (NT4017) – 10 Credit Points
Electrical Machines and Drives (NT40) – 10 Credit Points
Fluid Dynamics (NT40) – 10 Credit Points

Optional Courses

Select one of the following options:

Option 1

BEng Individual Project (NT4014)
Group Design Project (BEng) (NT4578)
Nonlinear Mechanics (NT4529)
Select a further 30 credit points from courses of choice

Option 2

Engineering Project Abroad (BEng) (NT4011)
Select a further 30 credit points from courses of choice in the first half-session

BEng Individual Project (NT4014) – 30 Credit Points
Engineering Project Abroad (BEng) (NT4011) – 60 Credit Points
Group Design Project (BEng) (NT4578) – 15 Credit Points
Nonlinear Mechanics (NT4529) – 15 Credit Points

Assessment Methods

Students are assessed by any combination of three assessment methods:

coursework such as essays and reports completed throughout the course;
practical assessments of the skills and competencies learnt on the course; and
written examinations at the end of each course.

The exact mix of these methods differs between subject areas, year of study and individual courses.

Honours projects are typically assessed on the basis of a written dissertation.

Why Study Petroleum Engineering?

We are the only University in Scotland that offers an undergraduate Petroleum Engineering degree and also a general engineering curriculum.
With Engineering at its heart, our Petroleum Engineering programme draws upon well-established expertise in Petroleum Geology within the University, and the local oil and gas industry.
The first two years of our engineering programmes cover general engineering. This means you develop vital knowledge in all engineering areas – making you far more adaptable in employment.
We deliver teaching in world class facilities, including laboratories dedicated to particular areas of work such as satellite communications, computer aided design, electrical machines, materials testing, laser welding, hydraulics and fluids, large structures and geotechnics.
The School has produced thousands of world-class graduates over the decades, many who have progressed into Managing Director and Chief Executive roles in the oil and gas and wider energy industries.
Across a number of our programmes, we work closely with colleagues within geology, chemistry and business disciplines to ensure the teaching is fit-for purpose.
We are well connected with local, national and international industry, particularly in the oil/gas/energy industry where you get the chance to experience real-life industry challenges and projects, through guest lectures, company visits and networking events.
All of our degrees have been accredited by the relevant professional engineering institutions, providing you with your first step into becoming a Chartered Engineer. Undergraduate Engineers intending to follow a professional engineering career should consider student membership of the appropriate Engineering Institution.
Our award winning Society of Petroleum Engineers Student Chapter is one of the 230 student chapters around the world. We build strong relationships with members and non-members alike, and help you gain insight into the oil and gas industry.
Hands-on experience of laboratory experiments and of industry-standard software is used to enhance your learning. Group design exercises based on real case field data and supervised by practising professionals from industry prepares you for work.
Opportunities exist for industry sponsored scholarships and bursaries, final year individual projects undertaken with industry, and study abroad opportunities.

Careers

There are many opportunities at the University of Northampton to develop your knowledge, gain experience and build a competitive set of skills to enhance your employability. This is essential for your future career success. The Careers Service can help you to plan your career and support your choices throughout your time with us, from first to final year – and beyond.

Your Employability

The University Careers Service aims to inspire and support your career success through collaboration, innovation and professionalism. We provide our students and recent graduates with the advice and information they need for effective career planning and skill development along with opportunities for networking and connecting with employers.

Entry requirements

SQA Highers

Standard: ABBB (Mathematics and Physics or Engineering Science required*)
Applicants who achieve the Standard entry requirements over S4 and S5 will be made either an unconditional or conditional offer of admission.

Minimum: BBB (Good performance required in Mathematics and Physics*)
Applicants who achieve our Minimum entry requirements over S4 and S5 are encouraged to apply and will be considered. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.

Adjusted: BB (Good performance required in Mathematics*)
Applicants who meet one or more of our Widening Participation criteria and who achieve good performance in Maths and one other subject may be made an adjusted offer of entry. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.

* These subjects can be either held at the time of application or be achieved during the appropriate admissions cycle.

A LEVELS

Standard: BBB (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Standard entry requirements are encouraged to apply and may be made an offer of admission.

Minimum: BBC (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Minimum entry requirements are encouraged to apply and will be considered.

Adjusted: BB (Good performance required in Mathematics)
Applicants who meet one or more Widening Participation criteria and who are predicted to achieve a good performance in Mathematics and one other subject may be made an Adjusted offer of entry.

FOR CHEMICAL AND PETROLEUM ENGINEERING PROGRAMMES

Please note: for entry to Chemical and Petroleum Engineering an SQA Higher or GCE A Level or equivalent qualification in Chemistry is required for entry to year 1, in addition to the general Engineering requirements.

English Language Requirements

To study for an Undergraduate degree at the University of Northampton University it is essential that you can speak, understand, read, and write English fluently. The minimum requirements for this degree are as follows:

IELTS Academic:

OVERALL – 6.0 with: Listening – 5.5; Reading – 5.5; Speaking – 5.5; Writing – 6.0

TOEFL iBT:

OVERALL – 78 with: Listening – 17; Reading – 18; Speaking – 20; Writing – 21

PTE Academic:

OVERALL – 54 with: Listening – 51; Reading – 51; Speaking – 51; Writing – 54

Cambridge English Advanced & Proficiency:

OVERALL – 169 with: Listening – 162; Reading – 162; Speaking – 162; Writing – 169

How to apply

This programm by online learning has start dates in September and January of each academic year.

We recommend that you apply as early as possible; this is particularly important for applicants who may need to allow sufficient time to take an English language test

Documentation required

Applications are made online via the University Application Service, EUCLID.

Please follow the instructions carefully and make sure that you have included the following documentation with your application:

Degree certificates showing award of degree.
Previous academic transcripts for all past degree programmes.
A reference in support or your application. The reference should be academic and dated no earlier than one year from the start of study on the LLM programme.
Evidence of English language proficiency, if required.

If you are currently studying for your degree or you are not in a possession of an English test result you may still apply to the programme. Please note that it is your responsibility to submit the necessary documents.

After you apply

After your application has been submitted you will be able to track its progress through the University’s applicant hub.

Application processing times will vary however the admissions team will endeavour to process your application within four to six weeks of submission. Please note that missing documentation will delay the application process.

You will be informed as soon as possible of the decision taken. Three outcomes are possible:

You may be offered a place unconditionally
You may be offered a conditional place, which means that you must fulfil certain conditions that will be specified in the offer letter. Where a conditional offer is made, it is your responsibility to inform the College Postgraduate Office when you have fulfilled the requirements set out.
Your application may be unsuccessful. If your application has not been successful, you can request feedback from us or refer to our guidance for unsuccessful applicants, which explains some of the common reasons we why we reach this decision.
View the University’s guidance for unsuccessful applicants

Terms and conditions of admissions

The University’s terms and conditions form part of your contract with the University, and you should read them, and our data protection policy, carefully before applying.

Northampton University admissions terms and conditions

Engineering (Civil and Structural), BEng

by mark allen | Nov 16, 2019 | Undergraduate

Course Overview

Overview

Structural Engineering is generally recognised as a specialist area of Civil Engineering but the two areas are very similar. This is a perfect degree programme for those looking to succeed in this field as it offers up our hugely successful standard Civil Engineering degree but introduces a number of key areas of specialism.

This Honours degree programme follows a similar structure to the straight BEng Civil Engineering degree. The major difference is the compulsory study of the Advanced Structural Analysis in year 4.

AT A GLANCE

LEARNING MODE	On Campus Learning
DEGREE QUALIFICATION	BEng
DURATION	48 months
STUDY MODE	Full Time

What You'll Study

The first two years cover general Engineering, with elements of Chemical, Mechanical, Petroleum and Electrical/Electronics, as well as Civil. In the later years you specialise, following your chosen discipline in greater depth. You do not need to finalise your choice of specialisation until you begin third year.

It is possible to move between MEng and BEng and this can be accomplished at any point until the second half session of fourth year. Successful BEng candidates will be offered the chance to change to the MEng and there is no quota, meaning that if grade requirements are met that transfer is guaranteed.

Compulsory Courses

Fluid Mechanics and Thermodynamics (NT2004) – 15 Credit Points
Engineering Mathematics 2 (NT2012) – 15 Credit Points
Process Engineering (NT2011) – 15 Credit Points
Design and Computing in Engineering Practice (NT2501) – 15 Credit Points
Solids and Structures (NT2502) – 15 Credit Points
Electrical and Mechanical Systems (NT2503) – 15 Credit Points

Optional Courses

Select a further 30 credit points from courses of choice.

Compulsory Courses

Fluid Mechanics and Thermodynamics (NT2004) – 15 Credit Points
Process Engineering (NT2011) – 15 Credit Points
Engineering Mathematics 2 (NT2012) – 15 Credit Points
Solids and Structures (NT2502) – 15 Credit Points
Design and Computing in Engineering Practice (NT2501) – 15 Credit Points
Electrical and Mechanical Systems (NT2503) – 15 Credit Points

Optional Courses

Select a further 30 credit points from courses of choice.

Compulsory Courses

Geotechnics 1 (NT3027) – 15 Credit Points
Engineering Analysis and Methods 1 (NT3007) – 15 Credit Points
Stress Analysis A (NT3015) – 15 Credit Points
Fluid Mechanics (NT3019) – 15 Credit Points
Mechanics of Structures (NT3518) – 15 Credit Points
Design of Structural Elements (NT3519) – 15 Credit Points
Structural Dynamics A (NT3538) – 10 Credit Points
Civil Engineering Design and Surveying (NT3720) – 10 Credit Points
Project and Safety Management (NT3599) – 10 Credit Points

There are three core courses of study in 4th year. Students then pick from two options when it comes to choosing choices.

Compulsory Courses

Geotechnics 2 (NT40) – 10 Credit Points
Civil Engineering Hydraulics (NT40) – 10 Credit Points
Advanced Structural Design (NT40) – 10 Credit Points

Optional Courses

Select one of the following options:

Option 1

Individual Project Abroad (BEng) (NT4011)
Select a further 30 credit points from courses of choice in the first-half session.

Option 2

BEng Individual Project (NT4014)
Group Design Project (BEng) (NT4578)
Select a further 30 credit points from courses of choice.

BEng Individual Project (NT4014) – 30 Credit Points
Engineering Project Abroad (BEng) (NT4011) – 60 Credit Points
Group Design Project (BEng) (NT4578) – 15 Credit Points

Assessment Methods

Students are assessed by any combination of three assessment methods:

coursework such as essays and reports completed throughout the course;
practical assessments of the skills and competencies learnt on the course; and
written examinations at the end of each course.

The exact mix of these methods differs between subject areas, year of study and individual courses.

Honours projects are typically assessed on the basis of a written dissertation.

Careers

There are many opportunities at the Northampton University to develop your knowledge, gain experience and build a competitive set of skills to enhance your employability. This is essential for your future career success. The Careers Service can help you to plan your career and support your choices throughout your time with us, from first to final year – and beyond.

Your Employability

The University Careers Service aims to inspire and support your career success through collaboration, innovation and professionalism. We provide our students and recent graduates with the advice and information they need for effective career planning and skill development along with opportunities for networking and connecting with employers.

Entry requirements

SQA Highers

Standard: ABBB (Mathematics and Physics or Engineering Science required*)
Applicants who achieve the Standard entry requirements over S4 and S5 will be made either an unconditional or conditional offer of admission.

Minimum: BBB (Good performance required in Mathematics and Physics*)
Applicants who achieve our Minimum entry requirements over S4 and S5 are encouraged to apply and will be considered. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.

Adjusted: BB (Good performance required in Mathematics*)
Applicants who meet one or more of our Widening Participation criteria and who achieve good performance in Maths and one other subject may be made an adjusted offer of entry. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.

* These subjects can be either held at the time of application or be achieved during the appropriate admissions cycle.

A LEVELS

Standard: BBB (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Standard entry requirements are encouraged to apply and may be made an offer of admission.

Minimum: BBC (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Minimum entry requirements are encouraged to apply and will be considered.

Adjusted: BB (Good performance required in Mathematics)
Applicants who meet one or more Widening Participation criteria and who are predicted to achieve a good performance in Mathematics and one other subject may be made an Adjusted offer of entry.

FOR CHEMICAL AND PETROLEUM ENGINEERING PROGRAMMES

Please note: for entry to Chemical and Petroleum Engineering an SQA Higher or GCE A Level or equivalent qualification in Chemistry is required for entry to year 1, in addition to the general Engineering requirements.

English Language Requirements

To study for an Undergraduate degree at the University of Northampton University it is essential that you can speak, understand, read, and write English fluently. The minimum requirements for this degree are as follows:

IELTS Academic:

OVERALL – 6.0 with: Listening – 5.5; Reading – 5.5; Speaking – 5.5; Writing – 6.0

TOEFL iBT:

OVERALL – 78 with: Listening – 17; Reading – 18; Speaking – 20; Writing – 21

PTE Academic:

OVERALL – 54 with: Listening – 51; Reading – 51; Speaking – 51; Writing – 54

Cambridge English Advanced & Proficiency:

OVERALL – 169 with: Listening – 162; Reading – 162; Speaking – 162; Writing – 169

How to apply

This programm by online learning has start dates in September and January of each academic year.

We recommend that you apply as early as possible; this is particularly important for applicants who may need to allow sufficient time to take an English language test

Documentation required

Applications are made online via the University Application Service, EUCLID.

Please follow the instructions carefully and make sure that you have included the following documentation with your application:

Degree certificates showing award of degree.
Previous academic transcripts for all past degree programmes.
A reference in support or your application. The reference should be academic and dated no earlier than one year from the start of study on the LLM programme.
Evidence of English language proficiency, if required.

If you are currently studying for your degree or you are not in a possession of an English test result you may still apply to the programme. Please note that it is your responsibility to submit the necessary documents.

After you apply

After your application has been submitted you will be able to track its progress through the University’s applicant hub.

Application processing times will vary however the admissions team will endeavour to process your application within four to six weeks of submission. Please note that missing documentation will delay the application process.

You will be informed as soon as possible of the decision taken. Three outcomes are possible:

You may be offered a place unconditionally
You may be offered a conditional place, which means that you must fulfil certain conditions that will be specified in the offer letter. Where a conditional offer is made, it is your responsibility to inform the College Postgraduate Office when you have fulfilled the requirements set out.
Your application may be unsuccessful. If your application has not been successful, you can request feedback from us or refer to our guidance for unsuccessful applicants, which explains some of the common reasons we why we reach this decision.
View the University’s guidance for unsuccessful applicants

Terms and conditions of admissions

The University’s terms and conditions form part of your contract with the University, and you should read them, and our data protection policy, carefully before applying.

Northampton University admissions terms and conditions

Engineering (Civil), BEng

by mark allen | Nov 16, 2019 | Undergraduate

Course Overview

Overview

Civil engineering is all about our environment. Civil engineers design, build and maintain our roads, railways, airports, dams, hospitals, schools and sports stadiums. They also design water supply systems and flood protection schemes. They keep our infrastructure working effectively and adapt it to meet challenges like population growth or climate change.

Civil Engineering is concerned with creative use of engineering principles and science to shape and improve our lives and our environment.

The work of the Civil Engineer centres on sustainable design for the built and natural environment, both onshore and offshore.

If you are interested in making lasting, positive improvements to society, in sustainable design for the protection of the natural environment on land or at sea, in improving the quality of life for millions of people using novel building techniques and materials, then Civil Engineering is the career choice for you.

The interdisciplinary content of our curriculum and focus on practical applications and value to industry and society provide our students with the necessary intellectual and transferrable skills for a career in a number of industries.

Our teaching is supported by our excellent workshop and laboratories, with state-of-the-art equipment, including some of Scotland’s very best hydraulic equipment.

AT A GLANCE

LEARNING MODE	On Campus Learning
DEGREE QUALIFICATION	BEng
DURATION	48 months
STUDY MODE	Full Time

Compulsory Courses

Principles of Electronics (NT1008) – 15 Credit Points
CAD and Communication in Engineering Practice (NT1010) – 15 Credit Points
Fundamentals of Engineering Materials (NT1012) – 15 Credit Points
Engineering Mathematics 1 (NT1504) – 15 Credit Points
Fundamental Engineering Mechanics (NT1510) – 15 Credit Points
Professional Skills Part 1 (NT1001)

Optional Courses

Select a further 45 credit points from courses of choice.

Compulsory Courses

Fluid Mechanics and Thermodynamics (NT2004) – 15 Credit Points
Process Engineering (NT2011) – 15 Credit Points
Engineering Mathematics 2 (NT2012) – 15 Credit Points
Solids and Structures (NT2502) – 15 Credit Points
Design and Computing in Engineering Practice (NT2501) – 15 Credit Points
Electrical and Mechanical Systems (NT2503) – 15 Credit Points

Optional Courses

Select a further 30 credit points from courses of choice.

Compulsory Courses

Geotechnics 1 (NT3027) – 15 Credit Points
Engineering Analysis and Methods 1 (NT3007) – 15 Credit Points
Stress Analysis A (NT3015) – 15 Credit Points
Fluid Mechanics (NT3019) – 15 Credit Points
Mechanics of Structures (NT3518) – 15 Credit Points
Design of Structural Elements (NT3519) – 15 Credit Points
Structural Dynamics A (NT3538) – 10 Credit Points
Civil Engineering Design and Surveying (NT3720) – 10 Credit Points
Project and Safety Management (NT3599) – 10 Credit Points

There are three core courses of study in 4th year. Students then pick from two options when it comes to choosing choices.

Compulsory Courses

Geotechnics 2 (NT40) – 10 Credit Points
Civil Engineering Hydraulics (NT40) – 10 Credit Points
Advanced Structural Design (NT40) – 10 Credit Points

Optional Courses

Select one of the following options:

Option 1

Individual Project Abroad (BEng) (NT4011)
Select a further 30 credit points from courses of choice in the first-half session.

Option 2

BEng Individual Project (NT4014)
Group Design Project (BEng) (NT4578)
Select a further 30 credit points from courses of choice.

BEng Individual Project (NT4014) – 30 Credit Points
Engineering Project Abroad (BEng) (NT4011) – 60 Credit Points
Group Design Project (BEng) (NT4578) – 15 Credit Points

What You'll Study

The first two years cover general Engineering, with elements of Chemical, Mechanical, Petroleum and Electrical/Electronics, as well as Civil. In the later years you specialise, following your chosen discipline in greater depth. You do not need to finalise your choice of specialisation until you begin third year.

It is possible to move between MEng and BEng and this can be accomplished at any point until the second half session of fourth year. Successful BEng candidates will be offered the chance to change to the MEng and there is no quota, meaning that if grade requirements are met that transfer is guaranteed.

Assessment Methods

Students are assessed by any combination of three assessment methods:

coursework such as essays and reports completed throughout the course;
practical assessments of the skills and competencies learnt on the course; and
written examinations at the end of each course.

The exact mix of these methods differs between subject areas, year of study and individual courses.

Honours projects are typically assessed on the basis of a written dissertation.

Why Study Engineering (Civil)?

Teaching is supported by an excellent workshop and laboratories with state-of-the-art facilities and equipment. Civil Engineering at Northampton has one of the best hydraulic laboratory facilities in Scotland associated with a high level research profile.
Benefit from: delivery of excellent teaching, working on projects associated with the real world, established strong industrial links that provide industry-focused teaching and projects.
The interdisciplinary content of our curriculum and focus on practical applications and value to industry and society provide our students with the necessary intellectual and transferable skills and an appreciation of ethical issues.
The first two years of our engineering programmes cover general engineering. This means you develop vital knowledge in all engineering areas.
The School has produced thousands of world-class graduates over the decades, many who have progressed into Managing Director and Chief Executive roles in the oil and gas and wider energy industries.
Across a number of our programmes, we work closely with colleagues across geology, chemistry and business disciplines to ensure the teaching is fit-for purpose.
We are well connected with local, national and international industry, particularly in the oil/gas/energy industry where you get the chance to experience real-life industry challenges and projects, through guest lectures, company visits and networking events.
Our degrees have been accredited by the relevant professional engineering institutions, providing you with your first step into becoming a chartered engineer. Undergraduate Engineers intending to follow a professional engineering career should consider student membership of the appropriate Engineering Institution.
Our award winning Society of Petroleum Engineers Student Chapter is one of the 230 student chapters around the world. We build strong relationships with members and non-members alike, and help you gain insight into the oil and gas industry.
TAU Racing was established in 2007 by a group of undergraduate engineers of various disciplines. The team’s goal each year is to design and build a single seat racing car to compete at Silverstone.
Hands-on experience of laboratory experiments and of industry-standard software is used to enhance your learning.
Opportunities exist for industry sponsored scholarships and bursaries, final year individual projects undertaken with industry, and study abroad opportunities.

Careers

Civil Engineering graduates are sought after in a wide variety of industries and business sectors. Civil Engineering graduates work in civil and structural companies, working on site, in design offices, project management, buildings and environmental engineering. Civil Engineers function very well in both onshore civil engineering sectors as well as the oil and gas energy sectors. In addition, as with any other discipline within our School, graduates benefit from processing skills in logical analysis, problem solving, management and communication which allow them to find employment outside the civil engineering discipline.

Many graduate jobs are open to students studying any subject area.

CAREER OPPORTUNITIES

Assistant Structural Engineer
Graduate Civil Engineer
Graduate Riser Engineer
Graduate Structural Engineer
Offshore Structural Engineer
Trainee Field Engineer

Entry requirements

QA Highers

Standard: ABBB (Mathematics and Physics or Engineering Science required*)
Applicants who achieve the Standard entry requirements over S4 and S5 will be made either an unconditional or conditional offer of admission.

Minimum: BBB (Good performance required in Mathematics and Physics*)
Applicants who achieve our Minimum entry requirements over S4 and S5 are encouraged to apply and will be considered. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.

Adjusted: BB (Good performance required in Mathematics*)
Applicants who meet one or more of our Widening Participation criteria and who achieve good performance in Maths and one other subject may be made an adjusted offer of entry. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.

* These subjects can be either held at the time of application or be achieved during the appropriate admissions cycle.

A LEVELS

Standard: BBB (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Standard entry requirements are encouraged to apply and may be made an offer of admission.

Minimum: BBC (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Minimum entry requirements are encouraged to apply and will be considered.

Adjusted: BB (Good performance required in Mathematics)
Applicants who meet one or more Widening Participation criteria and who are predicted to achieve a good performance in Mathematics and one other subject may be made an Adjusted offer of entry.

FOR CHEMICAL AND PETROLEUM ENGINEERING PROGRAMMES

Please note: for entry to Chemical and Petroleum Engineering an SQA Higher or GCE A Level or equivalent qualification in Chemistry is required for entry to year 1, in addition to the general Engineering requirements.

English Language Requirements

To study for an Undergraduate degree at the University of Northampton University it is essential that you can speak, understand, read, and write English fluently. The minimum requirements for this degree are as follows:

IELTS Academic:

OVERALL – 6.0 with: Listening – 5.5; Reading – 5.5; Speaking – 5.5; Writing – 6.0

TOEFL iBT:

OVERALL – 78 with: Listening – 17; Reading – 18; Speaking – 20; Writing – 21

PTE Academic:

OVERALL – 54 with: Listening – 51; Reading – 51; Speaking – 51; Writing – 54

Cambridge English Advanced & Proficiency:

OVERALL – 169 with: Listening – 162; Reading – 162; Speaking – 162; Writing – 169

How to apply

This programm by online learning has start dates in September and January of each academic year.

We recommend that you apply as early as possible; this is particularly important for applicants who may need to allow sufficient time to take an English language test

Documentation required

Applications are made online via the University Application Service, EUCLID.

Please follow the instructions carefully and make sure that you have included the following documentation with your application:

Degree certificates showing award of degree.
Previous academic transcripts for all past degree programmes.
A reference in support or your application. The reference should be academic and dated no earlier than one year from the start of study on the LLM programme.
Evidence of English language proficiency, if required.

If you are currently studying for your degree or you are not in a possession of an English test result you may still apply to the programme. Please note that it is your responsibility to submit the necessary documents.

After you apply

After your application has been submitted you will be able to track its progress through the University’s applicant hub.

Application processing times will vary however the admissions team will endeavour to process your application within four to six weeks of submission. Please note that missing documentation will delay the application process.

You will be informed as soon as possible of the decision taken. Three outcomes are possible:

You may be offered a place unconditionally
You may be offered a conditional place, which means that you must fulfil certain conditions that will be specified in the offer letter. Where a conditional offer is made, it is your responsibility to inform the College Postgraduate Office when you have fulfilled the requirements set out.
Your application may be unsuccessful. If your application has not been successful, you can request feedback from us or refer to our guidance for unsuccessful applicants, which explains some of the common reasons we why we reach this decision.
View the University’s guidance for unsuccessful applicants

Terms and conditions of admissions

The University’s terms and conditions form part of your contract with the University, and you should read them, and our data protection policy, carefully before applying.

Northampton University admissions terms and conditions

Engineering (Electrical and Electronic), BEng

by mark allen | Nov 16, 2019 | Undergraduate

Course Overview

Overview

Electrical and Electronic Engineering is at the core of the modern world, from computers, to digital circuits, photonics and a wealth of electronics.

Our society relies on Electrical Engineers for everything from low power electrical machines, control systems, to high voltage electrical power generation and distribution systems. Electrical and Electronic Engineering is at the core of the modern world, from computers, to digital circuits, photonics and a wealth of electronic devices. Electrical and Electronic engineering is one of the most satisfying subjects that you can study.

If your interests are science, technology or mathematics, then consider electrical and electronic engineering as your career. You will use your imagination, creativity and knowledge to provide society with the complex systems it needs. In your future career you may design the machines that supply our energy needs, digital control systems for aircraft, internet-enabled sensors, design complete computer systems on a silicon chip, photonics to instrument the ocean depths, create stunning electronic displays, or design the latest communications satellite or mobile phone.

AT A GLANCE

LEARNING MODE	On Campus Learning
DEGREE QUALIFICATION	BEng
DURATION	48 months
STUDY MODE	Full Time

In year 1 you can study topics such as Engineering Mathematics, Principles of Electronics, Electronics Design, Fundamental Engineering Mechanics, Fundamentals of Engineering Materials and Computer Aided Design & Communication.

Compulsory Courses

Principles of Electronics (NT1008) – 15 Credit Points
CAD and Communication in Engineering Practice (NT1010) – 15 Credit Points
Electronics Design (NT1501) – 15 Credit Points
Engineering Mathematics 1 (NT1504) – 15 Credit Points
Fundamentals of Engineering Materials (NT1012) – 15 Credit Points
Fundamental Engineering Mechanics (NT1510) – 15 Credit Points
Professional Skills Part 1 (NT1001)

Optional Courses

Select a further 30 credit points from courses of choice.

Compulsory Courses

Fluid Mechanics and Thermodynamics (NT2004) – 15 Credit Points
Design and Computing in Engineering Practice (NT2501) – 15 Credit Points
Process Engineering (NT2011) – 15 Credit Points
Engineering Mathematics 2 (NT2012) – 15 Credit Points
Electrical and Mechanical Systems (NT2503) – 15 Credit Points
Electronic Systems (NT2504) – 15 Credit Points

Optional Courses

Select a further 30 credit points from courses of choice.

Compulsory Courses

Geotechnics 1 (NT3027) – 15 Credit Points
Stress Analysis A (NT3015) – 15 Credit Points
Engineering Analysis and Methods 1 (NT3007) – 15 Credit Points
Fluid Mechanics (NT3019) – 15 Credit Points
Mechanics of Structures (NT3518) – 15 Credit Points
Design of Structural Elements (NT3519) – 15 Credit Points
Structural Dynamics A (NT3538) – 10 Credit Points
Civil Engineering Design and Surveying (NT3720) – 10 Credit Points
Project and Safety Management (NT3599) – 10 Credit Points

The major feature is the individual project in the area of your specialisation. The project occupies half of your study time and can be undertaken in Northampton or abroad. The opportunity exists to study a European language to support this study.

Compulsory Courses

BEng Individual Project (NT4014) – 30 Credit Points
Sensing and Instrumentation (NT4017) – 10 Credit Points
Electrical Machines and Drives (NT40) – 10 Credit Points
Computer and Software Engineering (NT40) – 10 Credit Points
Communications Engineering 2 (NT4546) – 15 Credit Points
Group Design Project (BEng) (NT4578) – 15 Credit Points

Optional Courses

Select a further 30 credit points from courses of choice.

What You'll Study

The first two years cover general Engineering, with elements of Chemical, Mechanical, Petroleum and Electrical/Electronics, as well as Civil. In the later years you specialise, following your chosen discipline in greater depth. You do not need to finalise your choice of specialisation until you begin third year.

It is possible to move between MEng and BEng and this can be accomplished at any point until the second half session of fourth year. Successful BEng candidates will be offered the chance to change to the MEng and there is no quota, meaning that if grade requirements are met that transfer is guaranteed.

Assessment Methods

Students are assessed by any combination of three assessment methods:

coursework such as essays and reports completed throughout the course;
practical assessments of the skills and competencies learnt on the course; and
written examinations at the end of each course.

The exact mix of these methods differs between subject areas, year of study and individual courses.

Honours projects are typically assessed on the basis of a written dissertation.

Why Study Engineering (Electrical and Electronic)?

The first two years of our engineering programmes cover general engineering. This means you develop vital knowledge in all engineering areas – making you far more adaptable in employment.
We deliver teaching in world-class facilities, including laboratories dedicated to particular areas of work such as satellite communications, computer aided design, electrical machines, materials testing, laser welding, hydraulics and fluids, large structures and geotechnics.
The School has produced thousands of world-class graduates over the decades, many who have progressed into Managing Director and Chief Executive roles.
Across a number of our programmes, we work closely with colleagues across geology, chemistry and business disciplines to ensure the teaching is fit-for purpose.
The Institute of Electrical and Electronic Engineers and the Engineering Society are active societies, offering you the chance to network and grow your skills away from the lecture theatre.
We are well connected with local, national and international industry, where you get the chance to experience real-life industry challenges and projects, through guest lectures, company visits and networking events.
All our degrees have been accredited by the relevant professional engineering institutions, providing you with your first step in to becoming a chartered engineer. Undergraduate Engineers intending to follow a professional engineering career should consider student membership of the appropriate Engineering Institution. Our EEE degree programmes are accredited by the Institution of Engineering and Technology (IET).
Years 3 and 4 of the programmes enable students to develop their skills in either electrical or electronics, supporting by experts from these subject areas.
TAU Racing was established in 2007 by a group of undergraduate engineers of various disciplines. The team’s goal each year is to design and build a single seat racing car to compete at Silverstone in the Formula Student competition.
Hands-on experience of laboratory experiments and of industry-standard software is used to enhance your learning. Group design exercises based on real case field data and supervised by practising professionals from industry prepares you for work.
Opportunities exist for industry sponsored scholarships and bursaries, final year individual projects undertaken with industry and study abroad opportunities.

Careers

Electrical engineers work with a wide range of large electrical devices, from power stations to renewable energy devices. They work with control systems involving motors and computers in industrial plant such as an offshore structure. Electronic engineers design and build computer systems, often specialised computers for a specific task. They develop instrumentation and optical systems that provide the eyes and wears we need to understand our world.

Entry requirements

SQA Highers

Standard: ABBB (Mathematics and Physics or Engineering Science required*)
Applicants who achieve the Standard entry requirements over S4 and S5 will be made either an unconditional or conditional offer of admission.

Minimum: BBB (Good performance required in Mathematics and Physics*)
Applicants who achieve our Minimum entry requirements over S4 and S5 are encouraged to apply and will be considered. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.

Adjusted: BB (Good performance required in Mathematics*)
Applicants who meet one or more of our Widening Participation criteria and who achieve good performance in Maths and one other subject may be made an adjusted offer of entry. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.

* These subjects can be either held at the time of application or be achieved during the appropriate admissions cycle.

A LEVELS

Standard: BBB (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Standard entry requirements are encouraged to apply and may be made an offer of admission.

Minimum: BBC (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Minimum entry requirements are encouraged to apply and will be considered.

Adjusted: BB (Good performance required in Mathematics)
Applicants who meet one or more Widening Participation criteria and who are predicted to achieve a good performance in Mathematics and one other subject may be made an Adjusted offer of entry.

FOR CHEMICAL AND PETROLEUM ENGINEERING PROGRAMMES

Please note: for entry to Chemical and Petroleum Engineering an SQA Higher or GCE A Level or equivalent qualification in Chemistry is required for entry to year 1, in addition to the general Engineering requirements.

English Language Requirements

To study for an Undergraduate degree at the University of Northampton University it is essential that you can speak, understand, read, and write English fluently. The minimum requirements for this degree are as follows:

IELTS Academic:

OVERALL – 6.0 with: Listening – 5.5; Reading – 5.5; Speaking – 5.5; Writing – 6.0

TOEFL iBT:

OVERALL – 78 with: Listening – 17; Reading – 18; Speaking – 20; Writing – 21

PTE Academic:

OVERALL – 54 with: Listening – 51; Reading – 51; Speaking – 51; Writing – 54

Cambridge English Advanced & Proficiency:

OVERALL – 169 with: Listening – 162; Reading – 162; Speaking – 162; Writing – 169

How to apply

This programm by online learning has start dates in September and January of each academic year.

We recommend that you apply as early as possible; this is particularly important for applicants who may need to allow sufficient time to take an English language test

Documentation required

Applications are made online via the University Application Service, EUCLID.

Please follow the instructions carefully and make sure that you have included the following documentation with your application:

Degree certificates showing award of degree.
Previous academic transcripts for all past degree programmes.
A reference in support or your application. The reference should be academic and dated no earlier than one year from the start of study on the LLM programme.
Evidence of English language proficiency, if required.

If you are currently studying for your degree or you are not in a possession of an English test result you may still apply to the programme. Please note that it is your responsibility to submit the necessary documents.

After you apply

After your application has been submitted you will be able to track its progress through the University’s applicant hub.

Application processing times will vary however the admissions team will endeavour to process your application within four to six weeks of submission. Please note that missing documentation will delay the application process.

You will be informed as soon as possible of the decision taken. Three outcomes are possible:

You may be offered a place unconditionally
You may be offered a conditional place, which means that you must fulfil certain conditions that will be specified in the offer letter. Where a conditional offer is made, it is your responsibility to inform the College Postgraduate Office when you have fulfilled the requirements set out.
Your application may be unsuccessful. If your application has not been successful, you can request feedback from us or refer to our guidance for unsuccessful applicants, which explains some of the common reasons we why we reach this decision.
View the University’s guidance for unsuccessful applicants

Terms and conditions of admissions

The University’s terms and conditions form part of your contract with the University, and you should read them, and our data protection policy, carefully before applying.

Northampton University admissions terms and conditions