Course Overview
Overview
Structural Engineering is generally recognised as a specialist area of Civil Engineering but the two areas are very similar. This is a perfect degree programme for those looking to succeed in this field as it offers up our hugely successful standard Civil Engineering degree but introduces a number of key areas of specialism.
This Honours degree programme follows a similar structure to the straight BEng Civil Engineering degree. The major difference is the compulsory study of the Advanced Structural Analysis in year 4.
AT A GLANCE
| LEARNING MODE | On Campus Learning |
| DEGREE QUALIFICATION | BEng |
| DURATION | 48 months |
| STUDY MODE | Full Time |
What You'll Study
The first two years cover general Engineering, with elements of Chemical, Mechanical, Petroleum and Electrical/Electronics, as well as Civil. In the later years you specialise, following your chosen discipline in greater depth. You do not need to finalise your choice of specialisation until you begin third year.
It is possible to move between MEng and BEng and this can be accomplished at any point until the second half session of fourth year. Successful BEng candidates will be offered the chance to change to the MEng and there is no quota, meaning that if grade requirements are met that transfer is guaranteed.
Compulsory Courses
- Fluid Mechanics and Thermodynamics (NT2004) – 15 Credit Points
- Engineering Mathematics 2 (NT2012) – 15 Credit Points
- Process Engineering (NT2011) – 15 Credit Points
- Design and Computing in Engineering Practice (NT2501) – 15 Credit Points
- Solids and Structures (NT2502) – 15 Credit Points
- Electrical and Mechanical Systems (NT2503) – 15 Credit Points
Optional Courses
Select a further 30 credit points from courses of choice.
Compulsory Courses
- Fluid Mechanics and Thermodynamics (NT2004) – 15 Credit Points
- Process Engineering (NT2011) – 15 Credit Points
- Engineering Mathematics 2 (NT2012) – 15 Credit Points
- Solids and Structures (NT2502) – 15 Credit Points
- Design and Computing in Engineering Practice (NT2501) – 15 Credit Points
- Electrical and Mechanical Systems (NT2503) – 15 Credit Points
Optional Courses
Select a further 30 credit points from courses of choice.
Compulsory Courses
- Geotechnics 1 (NT3027) – 15 Credit Points
- Engineering Analysis and Methods 1 (NT3007) – 15 Credit Points
- Stress Analysis A (NT3015) – 15 Credit Points
- Fluid Mechanics (NT3019) – 15 Credit Points
- Mechanics of Structures (NT3518) – 15 Credit Points
- Design of Structural Elements (NT3519) – 15 Credit Points
- Structural Dynamics A (NT3538) – 10 Credit Points
- Civil Engineering Design and Surveying (NT3720) – 10 Credit Points
- Project and Safety Management (NT3599) – 10 Credit Points
There are three core courses of study in 4th year. Students then pick from two options when it comes to choosing choices.
Compulsory Courses
- Geotechnics 2 (NT40) – 10 Credit Points
- Civil Engineering Hydraulics (NT40) – 10 Credit Points
- Advanced Structural Design (NT40) – 10 Credit Points
Optional Courses
Select one of the following options:
Option 1
- Individual Project Abroad (BEng) (NT4011)
- Select a further 30 credit points from courses of choice in the first-half session.
Option 2
- BEng Individual Project (NT4014)
- Group Design Project (BEng) (NT4578)
- Select a further 30 credit points from courses of choice.
- BEng Individual Project (NT4014) – 30 Credit Points
- Engineering Project Abroad (BEng) (NT4011) – 60 Credit Points
- Group Design Project (BEng) (NT4578) – 15 Credit Points
Assessment Methods
Students are assessed by any combination of three assessment methods:
- coursework such as essays and reports completed throughout the course;
- practical assessments of the skills and competencies learnt on the course; and
- written examinations at the end of each course.
The exact mix of these methods differs between subject areas, year of study and individual courses.
Honours projects are typically assessed on the basis of a written dissertation.
Careers
There are many opportunities at the Northampton University to develop your knowledge, gain experience and build a competitive set of skills to enhance your employability. This is essential for your future career success. The Careers Service can help you to plan your career and support your choices throughout your time with us, from first to final year – and beyond.
Your Employability
The University Careers Service aims to inspire and support your career success through collaboration, innovation and professionalism. We provide our students and recent graduates with the advice and information they need for effective career planning and skill development along with opportunities for networking and connecting with employers.
Entry requirements
SQA Highers
Standard: ABBB (Mathematics and Physics or Engineering Science required*)
Applicants who achieve the Standard entry requirements over S4 and S5 will be made either an unconditional or conditional offer of admission.
Minimum: BBB (Good performance required in Mathematics and Physics*)
Applicants who achieve our Minimum entry requirements over S4 and S5 are encouraged to apply and will be considered. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.
Adjusted: BB (Good performance required in Mathematics*)
Applicants who meet one or more of our Widening Participation criteria and who achieve good performance in Maths and one other subject may be made an adjusted offer of entry. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.
* These subjects can be either held at the time of application or be achieved during the appropriate admissions cycle.
A LEVELS
Standard: BBB (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Standard entry requirements are encouraged to apply and may be made an offer of admission.
Minimum: BBC (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Minimum entry requirements are encouraged to apply and will be considered.
Adjusted: BB (Good performance required in Mathematics)
Applicants who meet one or more Widening Participation criteria and who are predicted to achieve a good performance in Mathematics and one other subject may be made an Adjusted offer of entry.
FOR CHEMICAL AND PETROLEUM ENGINEERING PROGRAMMES
Please note: for entry to Chemical and Petroleum Engineering an SQA Higher or GCE A Level or equivalent qualification in Chemistry is required for entry to year 1, in addition to the general Engineering requirements.
English Language Requirements
English Language Requirements
To study for an Undergraduate degree at the University of Northampton University it is essential that you can speak, understand, read, and write English fluently. The minimum requirements for this degree are as follows:
IELTS Academic:
OVERALL – 6.0 with: Listening – 5.5; Reading – 5.5; Speaking – 5.5; Writing – 6.0
TOEFL iBT:
OVERALL – 78 with: Listening – 17; Reading – 18; Speaking – 20; Writing – 21
PTE Academic:
OVERALL – 54 with: Listening – 51; Reading – 51; Speaking – 51; Writing – 54
Cambridge English Advanced & Proficiency:
OVERALL – 169 with: Listening – 162; Reading – 162; Speaking – 162; Writing – 169
How to apply
This programm by online learning has start dates in September and January of each academic year.
We recommend that you apply as early as possible; this is particularly important for applicants who may need to allow sufficient time to take an English language test
Documentation required
Applications are made online via the University Application Service, EUCLID.
Please follow the instructions carefully and make sure that you have included the following documentation with your application:
- Degree certificates showing award of degree.
- Previous academic transcripts for all past degree programmes.
- A reference in support or your application. The reference should be academic and dated no earlier than one year from the start of study on the LLM programme.
- Evidence of English language proficiency, if required.
If you are currently studying for your degree or you are not in a possession of an English test result you may still apply to the programme. Please note that it is your responsibility to submit the necessary documents.
After you apply
After your application has been submitted you will be able to track its progress through the University’s applicant hub.
Application processing times will vary however the admissions team will endeavour to process your application within four to six weeks of submission. Please note that missing documentation will delay the application process.
You will be informed as soon as possible of the decision taken. Three outcomes are possible:
- You may be offered a place unconditionally
- You may be offered a conditional place, which means that you must fulfil certain conditions that will be specified in the offer letter. Where a conditional offer is made, it is your responsibility to inform the College Postgraduate Office when you have fulfilled the requirements set out.
- Your application may be unsuccessful. If your application has not been successful, you can request feedback from us or refer to our guidance for unsuccessful applicants, which explains some of the common reasons we why we reach this decision.
View the University’s guidance for unsuccessful applicants
Terms and conditions of admissions
-
The University’s terms and conditions form part of your contract with the University, and you should read them, and our data protection policy, carefully before applying.
Northampton University admissions terms and conditions